Difficulty

Easy

Steps

4

Time Required

                          3 - 5 minutes

Sections

3

  • Battery
  • 1 step
  • Service Cover
  • 1 step
  • Wireless LAN
  • 2 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackHP Pavilion dv6-6c51ca

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Remove the battery
  • Make sure to turn off the computer and unplug the AC adapter from the computer. It is good practice to remove the battery and any other power source before working with any internal part in your computer.
  • REMOVING THE BATTERY: Flip the laptop over with the battery side facing up.
  • Slide the battery release latch to release the battery.
  • Pivot the front edge of the battery up and back.
  • Remove the battery.
  • REPLACING THE BATTERY: Align the tabs on the rear edge of the battery with the notches on the rear edge of the battery bay.
  • Pivot the front edge of the battery down into the battery bay until it is fully seated. (The battery release latch will automatically lock into place.)
  • Battery part number: 593554-001

Make sure to turn off the computer and unplug the AC adapter from the computer. It is good practice to remove the battery and any other power source before working with any internal part in your computer.

REMOVING THE BATTERY: Flip the laptop over with the battery side facing up.

Slide the battery release latch to release the battery.

Pivot the front edge of the battery up and back.

Remove the battery.

REPLACING THE BATTERY: Align the tabs on the rear edge of the battery with the notches on the rear edge of the battery bay.

Pivot the front edge of the battery down into the battery bay until it is fully seated. (The battery release latch will automatically lock into place.)

Battery part number: 593554-001

1024

Step 2

              Remove the service cover
  • Note: As as safety feature, the service cover cannot be removed without removing the battery first.
  • Slide the service cover release latch to release the service cover.
  • Lift the rear edge of the service cover up and forward until it rests at an angle, being careful not to break the small plastic tabs that hold the cover in place. (A plastic spudger can be used to release the tabs)
  • Remove the service cover.

Note: As as safety feature, the service cover cannot be removed without removing the battery first.

Slide the service cover release latch to release the service cover.

Lift the rear edge of the service cover up and forward until it rests at an angle, being careful not to break the small plastic tabs that hold the cover in place. (A plastic spudger can be used to release the tabs)

Remove the service cover.

Step 3

              Disconnect the WLAN antenna cables
  • The #1/black WLAN antenna cable is connected to the WLAN module MAIN terminal. The #2/gray WLAN antenna cable is connected to the WLAN module AUX terminal.
  • Using a pair of tweezers, carefully disconnect the WLAN antenna cables from the terminals on the WLAN module.

The #1/black WLAN antenna cable is connected to the WLAN module MAIN terminal. The #2/gray WLAN antenna cable is connected to the WLAN module AUX terminal.

Using a pair of tweezers, carefully disconnect the WLAN antenna cables from the terminals on the WLAN module.

Step 4

              Remove the WLAN module
  • Remove the two Phillips PM2.0×4.0 screws that secure the WLAN module to the system board. (The WLAN module tilts up.)
  • Remove the WLAN module by pulling the module away from the slot at an angle.

Remove the two Phillips PM2.0×4.0 screws that secure the WLAN module to the system board. (The WLAN module tilts up.)

Remove the WLAN module by pulling the module away from the slot at an angle.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Cokyaw

Member since: 10/13/2018

458 Reputation

                                      6 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge