Hp Pavilion G7 2023Cl Ram Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          5 minutes

Sections

Battery
2 steps
Service Door
2 steps
RAM
3 steps

Flags

BackHP Pavilion g7-2023cl
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

This device supports up to 8 GB of system RAM. This guide is written for the maximum amount of RAM for your device. The RAM that is sold on the market that is compatible with this device comes in either 2 GB or 4 GB per RAM modules. You can’t use both 2 GB and 4GB of RAM together. If you plan to upgrade the RAM on the system, both RAM modules must be the same size.

What you need

Step 1

              Battery

Shut off your device and disconnect the power cord. Disconnect any external devices connected to the device.
Place your finger on the battery lock slider, press toward the center of the laptop to unlock the battery.
The lock will make a click sound letting you know that the battery is unlocked.

Shut off your device and disconnect the power cord. Disconnect any external devices connected to the device.

Place your finger on the battery lock slider, press toward the center of the laptop to unlock the battery.

The lock will make a click sound letting you know that the battery is unlocked.

1024

Step 2

Use your thumb to pry up the edge of the battery and lift it out of the device.
When replacing the battery, align the notch on the battery with the battery lock on the device. Gently press down on the battery until you hear the lock click, which signals that the battery is secure.

Use your thumb to pry up the edge of the battery and lift it out of the device.

When replacing the battery, align the notch on the battery with the battery lock on the device. Gently press down on the battery until you hear the lock click, which signals that the battery is secure.

Step 3

              Service Door

Using a Phillips #0 screwdriver, loosen the service door screw.
This is a captive screw that will remain attached to the service door.

Using a Phillips #0 screwdriver, loosen the service door screw.

This is a captive screw that will remain attached to the service door.

Step 4

Lift the service door up and away from the device.

Lift the service door up and away from the device.

Step 5

RAM

Locate the RAM modules on the device.

Locate the RAM modules on the device.

Step 6

Using your fingers or a pair of spudgers, push outward on the retention clips that hold the RAM modules in place.
There are two stacked RAM module slots. Each slot has its own pair of retention clips.

Using your fingers or a pair of spudgers, push outward on the retention clips that hold the RAM modules in place.

There are two stacked RAM module slots. Each slot has its own pair of retention clips.

Step 7

The RAM module will spring up at a 45-degree angle.
Remove the RAM module by pulling it out of the slot at the same 45-degree angle.
Repeat these steps to remove the second RAM module.
When inserting RAM modules, fill the bottom slot first, even if you are replacing only one module. Insert RAM modules into the slot at the same 45-degree angle. Then press down on the RAM module until the retention clips lock it in place.

The RAM module will spring up at a 45-degree angle.

Remove the RAM module by pulling it out of the slot at the same 45-degree angle.

Repeat these steps to remove the second RAM module.

When inserting RAM modules, fill the bottom slot first, even if you are replacing only one module. Insert RAM modules into the slot at the same 45-degree angle. Then press down on the RAM module until the retention clips lock it in place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor

                    Thomas Maloney

Member since: 03/21/2019

1,060 Reputation

                                      9 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       UMass Dartmouth, Team S8-G4, Bailey Spring 2019                        

                                                  Member of UMass Dartmouth, Team S8-G4, Bailey Spring 2019 



                    UMASSD-BAILEY-S19S8G4                     


                                            3 Members                     


                                            9 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team