Hp Pavilion X360 14 Ba253Cl Battery Replacement Repair Guide

Difficulty

Easy

Steps

7

Time Required

                          10 minutes            

Sections

2

• Keyboard
• 5 steps
• Battery
• 2 steps

Flags

Missed a Step

Oops! This guide is currently missing some important steps.

Better Introduction

Improve this guide by completing or revising its introduction.

• BackHP Pavilion x360 14-ba253cl

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Keyboard               

• Use the Jimmy to remove the footpads located at the bottom of the laptop.

Use the Jimmy to remove the footpads located at the bottom of the laptop.

1024

Step 2

• Remove three 4.0mm Phillips #0 screws from the top of the cover.
• Remove two 6.0mm Phillips #0 screws underneath each of the back footpads.
• Remove one 4.mm Phillips #0 screw beneath the divot.

Remove three 4.0mm Phillips #0 screws from the top of the cover.

Remove two 6.0mm Phillips #0 screws underneath each of the back footpads.

Remove one 4.mm Phillips #0 screw beneath the divot.

Step 3

• Turn the computer onto its base, with the computer open and the keys facing upward.

Turn the computer onto its base, with the computer open and the keys facing upward.

Step 4

• Use an opening pick to separate the keyboard from the base of the laptop.

Use an opening pick to separate the keyboard from the base of the laptop.

Step 5

• Raise the keyboard slightly to gain access to the touch pad and keyboard cables.
• Using a spudger, lift up the plastic locks that connect the ribbon cable to the system board.
• Use the blue plastic tab on the ribbon cable to pull it out from the system board.
• Remove the keyboard from the laptop.

Raise the keyboard slightly to gain access to the touch pad and keyboard cables.

Using a spudger, lift up the plastic locks that connect the ribbon cable to the system board.

Use the blue plastic tab on the ribbon cable to pull it out from the system board.

Remove the keyboard from the laptop.

Step 6

              Battery               

• Remove six 3mm Phillips #00 screws around the perimeter of the battery.

Remove six 3mm Phillips #00 screws around the perimeter of the battery.

Step 7

• Carefully lift the battery starting from the lower right corner and disconnect it from the system board.

Carefully lift the battery starting from the lower right corner and disconnect it from the system board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    ryan reichard                     

Member since: 10/15/2019

243 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Grand Valley State University, Team S1-G5, DeVasto Fall 2019                        

                                                  Member of Grand Valley State University, Team S1-G5, DeVasto Fall 2019 



                    GVSU-DEVASTO-F19S1G5                     


                                            4 Members                     


                                            2 Guides authored                     

Oleg - Mar 24, 2022

Reply

Thanks, it was useful