Difficulty
Moderate
Steps
4
Time Required
5 - 10 minutes
Sections
1
- Hard Drive
- 4 steps
Flags
0
BackHP ProBook 450 G4
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Hard Drive
- Power your laptop off.
- Flip the laptop over.
- Orient the laptop so the two vents on the bottom face upward and are further away from you.
Power your laptop off.
Flip the laptop over.
Orient the laptop so the two vents on the bottom face upward and are further away from you.
1024
Step 2
- Use the Phillips #0 screwdriver to remove the 6.8 mm screw that secures the vent panel to the laptop.
- Use the spudger to separate the vent panel from the laptop.
- Slide the vent panel off the backside of the laptop.
Use the Phillips #0 screwdriver to remove the 6.8 mm screw that secures the vent panel to the laptop.
Use the spudger to separate the vent panel from the laptop.
Slide the vent panel off the backside of the laptop.
Step 3
- Use the Phillips #0 screwdriver to remove the black 3.2mm screw that secures the hard drive to the left side of the laptop.
Use the Phillips #0 screwdriver to remove the black 3.2mm screw that secures the hard drive to the left side of the laptop.
Step 4
- Use the spudger to lift the left side of the hard drive up.
- Pull the hard drive diagonally to the left to release the hard drive from the laptop.
Use the spudger to lift the left side of the hard drive up.
Pull the hard drive diagonally to the left to release the hard drive from the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Sebastian Dow
Member since: 01/23/2020
857 Reputation
6 Guides authored
Badges:
11
+8 more badges
Team
Cal Poly, Team S1-G3, White Winter 2020
Member of Cal Poly, Team S1-G3, White Winter 2020
CPSU-WHITE-W20S1G3
4 Members
15 Guides authored