Hp Spectre 13 4002Dx Display Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          25 - 40 minutes

Sections

Motherboard
1 step
Display
3 steps

Flags

BackHP Spectre 13-4002dx
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Motherboard

Remove the black tape from the motherboard.
Remove five screws using the Phillips #00 screwdriver that holds the motherboard in place.
Disconnect five ribbon cables, three power cables, and two wifi antennas from the motherboard.
Gently lift the motherboard out of the computer. Be careful to not to disturb the CPU fan.
Do not bend the motherboard.

Remove the black tape from the motherboard.

Remove five screws using the Phillips #00 screwdriver that holds the motherboard in place.

Disconnect five ribbon cables, three power cables, and two wifi antennas from the motherboard.

Gently lift the motherboard out of the computer. Be careful to not to disturb the CPU fan.

Do not bend the motherboard.

1024

Step 2

              Display

Remove four screws connecting the screen to the laptop case with the Phillips #00 screwdriver.

Remove four screws connecting the screen to the laptop case with the Phillips #00 screwdriver.

Step 3

Bring the laptop screen to a 270 degree angle from the base.
Pull the display towards you for the display to pop out of the base.
Gently remove the display to ensure that the cables do not get caught on the case.

Bring the laptop screen to a 270 degree angle from the base.

Pull the display towards you for the display to pop out of the base.

Gently remove the display to ensure that the cables do not get caught on the case.

Step 4

Remove the rubber seal around display with the opening tool.
Pry the display off.
Be careful while removing the display as it could snap and cause damage and/or injury. Be careful to not cut any wiring between the screen and its casing.

Remove the rubber seal around display with the opening tool.

Pry the display off.

Be careful while removing the display as it could snap and cause damage and/or injury. Be careful to not cut any wiring between the screen and its casing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor

                    Aidan

Member since: 02/20/2020

105 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       The Citadel Military College of South Carolina, Team S1-G5, Eggleston Spring 2020                        

                                                  Member of The Citadel Military College of South Carolina, Team S1-G5, Eggleston Spring 2020 



                    CMCSC-EGGLESTON-S20S1G5                     


                                            3 Members                     


                                            3 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team