Difficulty
Moderate
Steps
7
Time Required
30 minutes
Sections
2
- Keyboard Assembly
- 4 steps
- Power Button
- 3 steps
Flags
4
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Needs More Images
A few more images would make this guide’s procedures crystal clear.
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackHP Stream 11-d008TU
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Rubber Feet Removal
- Use a prying tool to pry the 2 rubber feet off closest to the hinge of the device
- Repeat this process for the other side of the device
- The bottom rubber feet do not have hidden screws underneath them, and as such, they are unnecessary to remove
Use a prying tool to pry the 2 rubber feet off closest to the hinge of the device
Repeat this process for the other side of the device
The bottom rubber feet do not have hidden screws underneath them, and as such, they are unnecessary to remove
1024
Step 2
Screw removal
- Remove the 11x 5mm Phillips PH-0 screws (circled)
Remove the 11x 5mm Phillips PH-0 screws (circled)
Step 3
Keyboard Unclipping
- Use your finger to pry the outer blue shell over the keyboard
- Continue this process around the edges of the device
- You may have to use a prying tool to pry the harder edges such as around the I/O ports
- Do not lift the keyboard once all the clips are undone, as there are still various cables connected
Use your finger to pry the outer blue shell over the keyboard
Continue this process around the edges of the device
You may have to use a prying tool to pry the harder edges such as around the I/O ports
Do not lift the keyboard once all the clips are undone, as there are still various cables connected
Step 4
Keyboard removal
- Disconnect the power button connector by peeling back the protective tape, using your fingernail to flip the white retaining clip back, and pulling the ribbon cable out
- Disconnect the touchpad connector by using your fingernail to flip the black retaining clip back, and pulling the ribbon cable out
- Disconnect the keyboard connector by using your fingernail to flip the black retaining clip back, and pulling the ribbon cable out
- Your keyboard assembly is now safe to remove
Disconnect the power button connector by peeling back the protective tape, using your fingernail to flip the white retaining clip back, and pulling the ribbon cable out
Disconnect the touchpad connector by using your fingernail to flip the black retaining clip back, and pulling the ribbon cable out
Disconnect the keyboard connector by using your fingernail to flip the black retaining clip back, and pulling the ribbon cable out
Your keyboard assembly is now safe to remove
Step 5
Connector removal
- Remove the power button connector from the power button by flipping the white tab up and pulling the ribbon cable out
Remove the power button connector from the power button by flipping the white tab up and pulling the ribbon cable out
Step 6
Unscrew Button
- Unscrew the two Philips PH0 2.5mm screws
Unscrew the two Philips PH0 2.5mm screws
Step 7
- Lift the power button out of the slot
Lift the power button out of the slot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
CONVERSION
Member since: 03/07/2020
1,114 Reputation
8 Guides authored
Badges:
16
+13 more badges
Team
Kid fixers
Member of Kid fixers
Community
134 Members
151 Guides authored
