Difficulty

Moderate

Steps

7

Time Required

                          25 minutes

Sections

2

  • HP Stream 13-c010nr Disassembly
  • 4 steps
  • USB Port
  • 3 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackHP Stream 13-c010nr

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              HP Stream 13-c010nr Disassembly
  • Remove the five rubber feet from the bottom of the laptop with a plastic opening tool.

Remove the five rubber feet from the bottom of the laptop with a plastic opening tool.

1024

Step 2

  • Remove the thirteen 5mm Phillips #0 screws from the bottom case.

Remove the thirteen 5mm Phillips #0 screws from the bottom case.

Step 3

  • Flip the laptop over and open it up.
  • Wedge a plastic opening tool between the keyboard and bottom case, pry upwards to separate the two pieces.
  • Lift up the keyboard.
  • Ribbon cables still connect the two pieces.

Flip the laptop over and open it up.

Wedge a plastic opening tool between the keyboard and bottom case, pry upwards to separate the two pieces.

Lift up the keyboard.

Ribbon cables still connect the two pieces.

Step 4

  • Use a spudger to flip up the retaining flaps on the keyboard ribbon cable ZIF sockets.
  • Pull up the ribbon cables from their sockets.

Use a spudger to flip up the retaining flaps on the keyboard ribbon cable ZIF sockets.

Pull up the ribbon cables from their sockets.

Step 5

              USB Port
  • Use a spudger to flip up the retaining flap on the USB port ribbon cable ZIF socket.
  • Pull the ribbon cable out of the socket.

Use a spudger to flip up the retaining flap on the USB port ribbon cable ZIF socket.

Pull the ribbon cable out of the socket.

Step 6

  • Remove the three 3mm Phillips #0 screws from the USB port.
  • Pull out the USB port.

Remove the three 3mm Phillips #0 screws from the USB port.

Pull out the USB port.

Step 7

  • Remove the chip containing the two USB Ports.

Remove the chip containing the two USB Ports.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Keegan Lapham

Member since: 02/22/2018

738 Reputation

                                      6 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       USF Tampa, Team S1-G3, Cagle Spring 2018                        

                                                  Member of USF Tampa, Team S1-G3, Cagle Spring 2018 



                    USFT-CAGLE-S18S1G3                     


                                            4 Members                     


                                            12 Guides authored