Difficulty

Easy

Steps

10

Time Required

                          20 minutes

Sections

1

  • Top Cover/Keyboard
  • 10 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackHP Stream 13-c110nr

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Top Cover/Keyboard
  • Close the device.
  • Remove AC adapter plug from electrical outlet.
  • Remove AC adapter from device.
  • Turn the device off.
  • Unplug all external devices from device.
  • If you are unsure whether the computer is off or in hibernation mode, start the computer and then shutdown the operating system.

Close the device.

Remove AC adapter plug from electrical outlet.

Remove AC adapter from device.

Turn the device off.

Unplug all external devices from device.

If you are unsure whether the computer is off or in hibernation mode, start the computer and then shutdown the operating system.

1024

Step 2

  • Turn the device upside down with the back facing towards you.

Turn the device upside down with the back facing towards you.

Step 3

  • Use a pick to remove the two (2) large computer feet along the back edge of the device.
  • Use a pick to remove the two (2) small computer feet.
  • Use a pick to remove the one (1) screw cover.
  • Place rubber computer feet in safe place for reassembly.

Use a pick to remove the two (2) large computer feet along the back edge of the device.

Use a pick to remove the two (2) small computer feet.

Use a pick to remove the one (1) screw cover.

Place rubber computer feet in safe place for reassembly.

Step 4

  • Remove the thirteen (13) Phillips P0 PM2.5x6.0 mm screws.
  • Place the thirteen (13) screws on magnetic mat for reassembly.

Remove the thirteen (13) Phillips P0 PM2.5x6.0 mm screws.

Place the thirteen (13) screws on magnetic mat for reassembly.

Step 5

  • Turn the device over with the front facing towards you.
  • Open the device as shown.

Turn the device over with the front facing towards you.

Open the device as shown.

Step 6

  • Insert the Spudger between the Top Cover and Bottom Cover to lift the front edge until it separates from the Bottom Cover.
  • Do not completely remove the Keyboard/Top cover from the Bottom cover yet.

Insert the Spudger between the Top Cover and Bottom Cover to lift the front edge until it separates from the Bottom Cover.

Do not completely remove the Keyboard/Top cover from the Bottom cover yet.

Step 7

  • Disconnect the Touchpad cable.

Disconnect the Touchpad cable.

Step 8

  • Disconnect the Keyboard Cable.

Disconnect the Keyboard Cable.

Step 9

  • Disconnect the Power connector cable.

Disconnect the Power connector cable.

Step 10

  • Remove the Keyboard/Top Cover from the device.

Remove the Keyboard/Top Cover from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Jules Millward

Member since: 01/29/2019

141 Reputation

                                      1 Guide authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Appalachian State University, Team S1-G2, Menagarishvili Spring 2019                        

                                                  Member of Appalachian State University, Team S1-G2, Menagarishvili Spring 2019 



                    APSU-MENAGARISHVILI-S19S1G2                     


                                            4 Members                     


                                            16 Guides authored