Htc Flyer Charging Port Replacement Repair Guide

Difficulty

Moderate

Steps

12

Time Required

                          10 - 20 minutes            

Sections

1

• Charging Port
• 12 steps

Flags

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

• BackHTC Flyer

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Charging Port               

• Remove the white portion of the top cover as shown. Push down on it to slide it off using just your fingers. Be careful not to break the clips holding it in place with removing it.

Remove the white portion of the top cover as shown. Push down on it to slide it off using just your fingers. Be careful not to break the clips holding it in place with removing it.

1024

Step 2

• Remove the five Torx T5 screws.

Remove the five Torx T5 screws.

Step 3

• Remove full frame on the back. A tip is to tape the volume button to the frame before removing it, as the volume button will fall out.

Remove full frame on the back. A tip is to tape the volume button to the frame before removing it, as the volume button will fall out.

Step 4

• Remove the plastic top cover of the motherboard.

Remove the plastic top cover of the motherboard.

Step 5

• Remove four T5 Torx screws.

Remove four T5 Torx screws.

Step 6

• Remove twelve of the connectors.

Remove twelve of the connectors.

Step 7

• Release the flex-screen touch cable. It is held in place with clips. Use the safe open pry tool to unclip it. Note that it will still be connected to the base and the motherboard.

Release the flex-screen touch cable. It is held in place with clips. Use the safe open pry tool to unclip it. Note that it will still be connected to the base and the motherboard.

Step 8

• Flip the motherboard and the flex screen to the left.

Flip the motherboard and the flex screen to the left.

Step 9

• Release the two file cables attached to the motherboard.

Release the two file cables attached to the motherboard.

Step 10

• Remove the motherboard. Note that the flex screen will not be removed with it and will remain attached to the tablet frame.

Remove the motherboard. Note that the flex screen will not be removed with it and will remain attached to the tablet frame.

Step 11

Step 12

• Remove the dock port flex cable. It will be tangled around other cables, so take care not to rip it while removing.

Remove the dock port flex cable. It will be tangled around other cables, so take care not to rip it while removing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Joshua Mahon                     

Member since: 11/26/2018

445 Reputation

                                      3 Guides authored                  



                       Badges:
                       3

Team

                       IUPUI, Team S5-G5, Wilson Fall 2018                        

                                                  Member of IUPUI, Team S5-G5, Wilson Fall 2018 



                    IUPUI-WILSON-F18S5G5                     


                                            4 Members                     


                                            3 Guides authored