Htc Hd2 Vibrator Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Sections

Battery
2 steps
Midframe
2 steps
Vibrator
2 steps

Flags

BackHTC HD2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Carefully pull the rear cover from the back of the phone.
Place a finger beneath the small lip on the left side of the battery.

Carefully pull the rear cover from the back of the phone.

Place a finger beneath the small lip on the left side of the battery.

1024

Step 2

Lay the phone down on it’s screen.
Lift up on the lip and pull the battery from the phone.

Lay the phone down on it’s screen.

Lift up on the lip and pull the battery from the phone.

Step 3

              Midframe

Remove the four black 3.5mm T5 screws from the back of the phone.

Remove the four black 3.5mm T5 screws from the back of the phone.

Step 4

Insert the flat end of a spudger between the midframe and the display.
Slide the spudger along the seam between the frame and the display.
Using the spudger for leverage, carefully pry the midframe away from the display assembly.
This process will take some effort. Continue to pry slowly and carefully until the frame begins to detach.
As it releases, pull the midframe away from the phone.
The volume control tab may fall off during removal. It can be easily reattached.

Insert the flat end of a spudger between the midframe and the display.

Slide the spudger along the seam between the frame and the display.

Using the spudger for leverage, carefully pry the midframe away from the display assembly.

This process will take some effort. Continue to pry slowly and carefully until the frame begins to detach.

As it releases, pull the midframe away from the phone.

The volume control tab may fall off during removal. It can be easily reattached.

Step 5

              Vibrator

Set the phone down on its screen.
Using tweezers, unplug the small vibrator connector from its socket on the motherboard.

Set the phone down on its screen.

Using tweezers, unplug the small vibrator connector from its socket on the motherboard.

Step 6

Pull the vibrator motor from the phone.

Pull the vibrator motor from the phone.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 9 other contributors

                    Nathan Puchalski

Member since: 04/26/2011

813 Reputation

                                      5 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Cal Poly, Team 24-55, Amido Spring 2011                        

                                                  Member of Cal Poly, Team 24-55, Amido Spring 2011 



                    CPSU-AMIDO-S11S24G55                     


                                            5 Members                     


                                            16 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team