Difficulty
Moderate
Steps
10
Time Required
15 - 30 minutes
Sections
5
- Disassembling HTC Incredible 2 Back Panel
- 2 steps
- Battery
- 2 steps
- SIM Card
- 2 steps
- Mid Panel
- 3 steps
- Power Button
- 1 step
Flags
1
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
BackHTC Incredible 2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Disassembling HTC Incredible 2 Back Panel
- Press your thumbnail into the slot between the rear panel and the front casing located on the bottom of the phone. Use a penny or dime if you have trouble using your thumbnail.
- With a moderate amount of force, pry the rear panel up and away from the phone. You may need to slide your thumbnail up the crack to separate the rear panel from the front casing.
- This can take a little bit of effort. Don’t be discouraged if you can’t get it right away.
Press your thumbnail into the slot between the rear panel and the front casing located on the bottom of the phone. Use a penny or dime if you have trouble using your thumbnail.
With a moderate amount of force, pry the rear panel up and away from the phone. You may need to slide your thumbnail up the crack to separate the rear panel from the front casing.
This can take a little bit of effort. Don’t be discouraged if you can’t get it right away.
1024
Step 2
- Remove the rear panel from the phone.
Remove the rear panel from the phone.
Step 3
Battery
- Press your fingernail into the slot between the battery and the rear inner frame, located between the battery and LED lights.
- Use a penny or dime if you can’t use your fingernail.
Press your fingernail into the slot between the battery and the rear inner frame, located between the battery and LED lights.
Use a penny or dime if you can’t use your fingernail.
Step 4
- Gently lever the battery up and away from the lights.
- Lift the top of the battery up and remove the battery from the rear inner frame.
Gently lever the battery up and away from the lights.
Lift the top of the battery up and remove the battery from the rear inner frame.
Step 5
SIM Card
- Apply pressure with your fingertip to the pressure clip beneath the SIM card.
- While keeping pressure on the clip, use another finger to gently slide the SIM card down over the clip.
Apply pressure with your fingertip to the pressure clip beneath the SIM card.
While keeping pressure on the clip, use another finger to gently slide the SIM card down over the clip.
Step 6
- Keep sliding SIM card until completely free from holding apparatus. Now remove the SIM card.
Keep sliding SIM card until completely free from holding apparatus. Now remove the SIM card.
Step 7
Mid Panel
- Remove the seven 1.42 mm Torx T5 screws
Remove the seven 1.42 mm Torx T5 screws
Step 8
- Use a plastic opening tool to run along the phone’s side and lever mid panel upward.
- Apply minimal pressure as the mid panel is very delicate.
Use a plastic opening tool to run along the phone’s side and lever mid panel upward.
Apply minimal pressure as the mid panel is very delicate.
Step 9
- Gently grasp and carefully lift mid panel up and away from the device with your fingers.
Gently grasp and carefully lift mid panel up and away from the device with your fingers.
Step 10
Power Button
- Firmly grasp the power button, located on the upper right corner of the mid panel, and gently lift it up and off the mid panel.
Firmly grasp the power button, located on the upper right corner of the mid panel, and gently lift it up and off the mid panel.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 4 other contributors
Cristian Suarez
Member since: 04/22/2014
108 Reputation
1 Guide authored
Badges:
8
+5 more badges
Team
Cal Poly, Team 11-53, Amido Spring 2014
Member of Cal Poly, Team 11-53, Amido Spring 2014
CPSU-AMIDO-S14S11G53
5 Members
14 Guides authored
