Difficulty
Very difficult
Steps
11
Time Required
25 - 35 minutes
Sections
4
- Loudspeaker
- 2 steps
- Battery
- 2 steps
- Logic Board
- 3 steps
- Display Assembly
- 4 steps
Flags
1
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackHTC Windows Phone 8S
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Video Overview
Step 1
Loudspeaker
- Switch off the phone.
- Remove the SIM / memory card cover.
- Remove any SIM and memory cards.
- Use screwdriver torx T5 and unscrew the two screws at the bottom of the battery / back cover.
Switch off the phone.
Remove the SIM / memory card cover.
Remove any SIM and memory cards.
Use screwdriver torx T5 and unscrew the two screws at the bottom of the battery / back cover.
1024
Step 2
- Use a plastic tool and slowly separate the back cover.
- The loudspeaker is inside on the back cover.
Use a plastic tool and slowly separate the back cover.
The loudspeaker is inside on the back cover.
Step 3
Battery
- Use a Phillips #0 screwdriver and remove the 4x silver screws.
- With a plastic tool carefully separate the battery from the logic board.
Use a Phillips #0 screwdriver and remove the 4x silver screws.
With a plastic tool carefully separate the battery from the logic board.
Step 4
- The battery connector is under the middle frame. Remove it and disconnect the battery.
- Model: BM59100 / 3,8VDC / 1700mAh
The battery connector is under the middle frame. Remove it and disconnect the battery.
Model: BM59100 / 3,8VDC / 1700mAh
Step 5
Flex Cables
- Remove the USB dock connector metal plate.
- Open flex cable connectors:
- LCD display flex cable
- Menu buttons flex cable
- Volume buttons flex cable
- Touch screen flex cable
- Power button flex cable
- Pick up the vibrating motor and take out all flex cables except the LCD display flex cable.
Remove the USB dock connector metal plate.
Open flex cable connectors:
LCD display flex cable
Menu buttons flex cable
Volume buttons flex cable
Touch screen flex cable
Power button flex cable
Pick up the vibrating motor and take out all flex cables except the LCD display flex cable.
Step 6
Logic Board Removal
- The logic board is secured to the display frame by two locking clips.
- Use a plastic tool to release it.
- Now remove the LCD display flex cable from its connector.
The logic board is secured to the display frame by two locking clips.
Use a plastic tool to release it.
Now remove the LCD display flex cable from its connector.
Step 7
Logic Board / Main Board
- HTC Windows Phone 8S Logic Board.
HTC Windows Phone 8S Logic Board.
Step 8
Display Assembly
- Insert wisdom here.
Insert wisdom here.
Step 9
- Check your spare part for the menu buttons flex cable.
- Remove the flex cable from the old touch screen if you need.
Check your spare part for the menu buttons flex cable.
Remove the flex cable from the old touch screen if you need.
Step 10
- Clean the frame from the old adhesive tape.
- Install new adhesive tape.
- It would be better if you use adhesive sticker ready for the model.
- Install the display assembly.
Clean the frame from the old adhesive tape.
Install new adhesive tape.
It would be better if you use adhesive sticker ready for the model.
Install the display assembly.
Step 11
- Prepare the menu buttons and LCD display flex cables.
- Start with reassembling.
- .
- .
- .
- .
- Did you do it successfully?
Prepare the menu buttons and LCD display flex cables.
Start with reassembling.
.
Did you do it successfully?
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
ZFix
Member since: 12/09/2013
187,195 Reputation
330 Guides authored
Badges:
35
+32 more badges
Team
Master Techs
Member of Master Techs
Community
310 Members
1,168 Guides authored
