Difficulty

Moderate

Steps

8

Time Required

                          1 hour

Sections

1

  • Digitizer
  • 8 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackHuawei Ascend G610

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Step 1

              Digitizer
  • This is a touchscreen with shattered glass.

This is a touchscreen with shattered glass.

1024

Step 2

  • Remove the outer cover.

Remove the outer cover.

Step 3

  • Remove the battery.

Remove the battery.

Step 4

  • With the help of a heat source and a cross-head screwdriver, remove the 9 screws along the sides of the phone . One screw is covered by an adhesive label.
  • Remove the shortest screw that secures the center of the body, located next to the SIM card.

With the help of a heat source and a cross-head screwdriver, remove the 9 screws along the sides of the phone . One screw is covered by an adhesive label.

Remove the shortest screw that secures the center of the body, located next to the SIM card.

Step 5

  • With the help of thin tool, unhinge the joints between the outer cover and the internal frame of the display.
  • Remove the outer cover.

With the help of thin tool, unhinge the joints between the outer cover and the internal frame of the display.

Step 6

  • Unplug the touchscreen connector.

Unplug the touchscreen connector.

Step 7

  • If the glass is broken, apply Scotch tape to avoid further damage.
  • Use a heat source to heat the edge of the glass.
  • With a thin tool
  • Insert translation here

If the glass is broken, apply Scotch tape to avoid further damage.

Use a heat source to heat the edge of the glass.

With a thin tool

Insert translation here

Step 8

  • Once the touch screen has been removed, proceed with the cleaning of the remaining double-sided adhesive tape
  • Apply the new double-sided adhesive and the new touch screen
  • To reassemble the device follow all the steps in reverse order

Once the touch screen has been removed, proceed with the cleaning of the remaining double-sided adhesive tape

Apply the new double-sided adhesive and the new touch screen

To reassemble the device follow all the steps in reverse order

To reassemble the device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             


        These translators are helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

Ben Johnson

irlanda

albertob

Author

                                      with 1 other contributor 


                    Smilzo

Member since: 11/09/2013

10,473 Reputation

                                      39 Guides authored                  



                       Badges:
                       23







                                                        +20 more badges