Difficulty

Moderate

Steps

7

Time Required

                          5 minutes

Sections

3

  • Battery
  • 2 steps
  • Back Panel
  • 3 steps
  • Camera
  • 2 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackHuawei M750

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Depress the top of the battery cover, and pull downwards towards the base of the phone.

Depress the top of the battery cover, and pull downwards towards the base of the phone.

1024

Step 2

  • Remove the battery by levering the battery out, using the cut just below the camera.

Remove the battery by levering the battery out, using the cut just below the camera.

Step 3

              Back Panel
  • Use the opening tool to start prying the camera and speaker cover, starting from the battery side.
  • Work the opening tool around the border of the camera and speaker cover, until it comes loose.

Use the opening tool to start prying the camera and speaker cover, starting from the battery side.

Work the opening tool around the border of the camera and speaker cover, until it comes loose.

Step 4

  • Using the T5 Torx screwdriver, remove the six 6mm screws.

Using the T5 Torx screwdriver, remove the six 6mm screws.

Step 5

  • Using the opening tool, pry the back panel from the front panel.
  • Work your way around the phone until the panels separate evenly.
  • This step may require a substantial amount of leverage.

Using the opening tool, pry the back panel from the front panel.

Work your way around the phone until the panels separate evenly.

This step may require a substantial amount of leverage.

Step 6

              Camera
  • The camera’s connection to the motherboard is shown here.
  • Using the tweezers, disconnect the port, shown here in the picture.

The camera’s connection to the motherboard is shown here.

Using the tweezers, disconnect the port, shown here in the picture.

Step 7

  • Using the tweezers, carefully remove the lens and lens casing.
  • It should be held in by a simple tight fit. The front panel is what keeps the lens secured.
  • Do not touch the camera lens, or the digital camera component, if possible. This will prevent scratching, or damage.

Using the tweezers, carefully remove the lens and lens casing.

It should be held in by a simple tight fit. The front panel is what keeps the lens secured.

Do not touch the camera lens, or the digital camera component, if possible. This will prevent scratching, or damage.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Stuart Smith

Member since: 02/11/2018

153 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       University of North Texas, Team S1-G6, Thompson Spring 2018                        

                                                  Member of University of North Texas, Team S1-G6, Thompson Spring 2018 



                    UNT-THOMPSON-S18S1G6                     


                                            3 Members                     


                                            15 Guides authored