Huawei S10 Tablet Usb Charge Port Replacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          10 - 15 minutes            

Sections

1

• Micro USB Charge Port
• 5 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackHuawei S10 Tablet 10" Model S10-231u

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              SIM & Micro SD Card removal               

• Open the cover and press the SIM card and Micro SD card in to release them both.
• Remove the screw under the hinge cover.

Open the cover and press the SIM card and Micro SD card in to release them both.

Remove the screw under the hinge cover.

1024

Step 2

              Remove Back Cover               

• Use a prying tool to loosen the back cover from the display.
• There are plastic clips holding the display and back cover together, but they come apart quite easily.

Use a prying tool to loosen the back cover from the display.

There are plastic clips holding the display and back cover together, but they come apart quite easily.

Step 3

              Remover Display Cable               

• Carefully separate the display unit from the back cover, but not too far.
• There is a cable connecting the two together.
• Lift the ZIF Connector and remove the Display Cable.
• Lay the display to one side.

Carefully separate the display unit from the back cover, but not too far.

There is a cable connecting the two together.

Lift the ZIF Connector and remove the Display Cable.

Lay the display to one side.

Step 4

              USB Charger Port Removal               

• Flip the ZIF connector to loosen the flex cable for the USB charger port.
• It is possible the cable is glued down, sliding a flat tip underneath should be enough to loosen it for removal.
• Remove the two screws holding the charger port in place.

Flip the ZIF connector to loosen the flex cable for the USB charger port.

It is possible the cable is glued down, sliding a flat tip underneath should be enough to loosen it for removal.

Remove the two screws holding the charger port in place.

Step 5

              Install New Charger Port               

• Install the new charger port, Insert the cable in the ZIF connector and test to make sure it charges. Replace the screws for the USB Board
• Insert the display into the back cover.
• Replace the screw by the SIM card / Micro SD card slot.
• Completed!

Install the new charger port, Insert the cable in the ZIF connector and test to make sure it charges. Replace the screws for the USB Board

Insert the display into the back cover.

Replace the screw by the SIM card / Micro SD card slot.

Completed!

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    Harvey                     

Member since: 02/15/2016

4,602 Reputation

                                      10 Guides authored                  



                       Badges:
                       15







                                                        +12 more badges