Ihome Iw1 Battery Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          15 - 20 minutes            

Sections

1

• Battery
• 6 steps

Flags

0

• BackiHome iW1 Speaker

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Remove the rubber from the bottom of the speaker, use a medium blue plastic spudger to gently work its way under the rubber and slowly peel off for each of the three feet. The order does not matter.

Remove the rubber from the bottom of the speaker, use a medium blue plastic spudger to gently work its way under the rubber and slowly peel off for each of the three feet. The order does not matter.

1024

Step 2

• Remove the six 11 mm Philips #1 screws found underneath the foam to remove the steel outer metal frame.
• Once the screws come off, keep them safely off to the side.

Remove the six 11 mm Philips #1 screws found underneath the foam to remove the steel outer metal frame.

Once the screws come off, keep them safely off to the side.

Step 3

• Remove the metal frame gently and set aside.

Remove the metal frame gently and set aside.

Step 4

• Remove the two remaining 11 mm Philips #1 screws holding the base and set them aside.

Remove the two remaining 11 mm Philips #1 screws holding the base and set them aside.

Step 5

• Lift the base up gently keeping in mind that the base is connected with wires to internal parts of the speaker.
• Disconnect the white bundled cable connector attached to the charging node using a spudger. The base of the speaker is now free to be removed.

Lift the base up gently keeping in mind that the base is connected with wires to internal parts of the speaker.

Disconnect the white bundled cable connector attached to the charging node using a spudger. The base of the speaker is now free to be removed.

Step 6

• Remove the white power cable connector that connects the charging node to the battery, using the plastic spudger.
• Pry the battery off using the plastic spudger.

Remove the white power cable connector that connects the charging node to the battery, using the plastic spudger.

Pry the battery off using the plastic spudger.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Salma Mohamed                     

Member since: 02/14/2017

137 Reputation

                                      1 Guide authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       USF Tampa, Team 20-6, Remmell Spring 2017                        

                                                  Member of USF Tampa, Team 20-6, Remmell Spring 2017 



                    USFT-REMMELL-S17S20G6                     


                                            4 Members                     


                                            9 Guides authored