Difficulty

Moderate

Steps

5

Time Required

                          15 minutes

Sections

2

  • Top Cover
  • 3 steps
  • Disk Drive
  • 2 steps

Flags

0

  • BackiLive IKBC384S

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Top Cover
  • Make sure you remove all seven 3 mm screws before proceeding to the next step.

Make sure you remove all seven 3 mm screws before proceeding to the next step.

1024

Step 2

  • Use iOpener or heat gun on all sides except the front.

Use iOpener or heat gun on all sides except the front.

Step 3

  • Be cautious when taking the top of the device off there may still be some adhesive stuck to device.
  • The top of the device will be very difficult to remove because of the adhesive holding it together.

Be cautious when taking the top of the device off there may still be some adhesive stuck to device.

The top of the device will be very difficult to remove because of the adhesive holding it together.

Step 4

              Disk Drive
  • Remove all four screws(13.5 mm in length) that are securing the device

Remove all four screws(13.5 mm in length) that are securing the device

Step 5

  • Remove both of the connected cords on the motherboard.
  • Also remove the flat ribbon cable that is connected to the motherboard.
  • Once you have removed all screws and cables connected to motherboard the disk drive can be easily removed

Remove both of the connected cords on the motherboard.

Also remove the flat ribbon cable that is connected to the motherboard.

Once you have removed all screws and cables connected to motherboard the disk drive can be easily removed

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Allen Dover

Member since: 03/21/2017

401 Reputation

                                      4 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Texas Tech, Team S46-G6, Bennett Spring 2017                        

                                                  Member of Texas Tech, Team S46-G6, Bennett Spring 2017 



                    TTU-BENNETT-S17S46G6                     


                                            3 Members                     


                                            6 Guides authored