Difficulty

Moderate

Steps

8

Time Required

                          20 minutes

Sections

2

  • Back Cover
  • 2 steps
  • Motherboard
  • 6 steps

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackiNet M1001

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover
  • Remove the two 4.1 mm PH1 screws with a Philips screwdriver.

Remove the two 4.1 mm PH1 screws with a Philips screwdriver.

1024

Step 2

  • Press the small suction cup on the back cover, and then pull the small suction cup to remove the back cover.

Press the small suction cup on the back cover, and then pull the small suction cup to remove the back cover.

Step 3

              Motherboard
  • Desolder the black and red wires and pull them off of the motherboard.
  • Check out this awesome guide for tips on soldering and desoldering.

Desolder the black and red wires and pull them off of the motherboard.

Check out this awesome guide for tips on soldering and desoldering.

Step 4

  • Desolder the grey wire and pull it off the motherboard.

Desolder the grey wire and pull it off the motherboard.

Step 5

  • Push out the ribbon cable connectors with a tweezer and pull out the ribbon cable.

Push out the ribbon cable connectors with a tweezer and pull out the ribbon cable.

Step 6

  • Lift up the zero insertion force clip with a tweezer and pull out the ribbon cable.

Lift up the zero insertion force clip with a tweezer and pull out the ribbon cable.

Step 7

  • Lift up the zero insertion force clip with a plastic opening tool and pull out the ribbon cable.

Lift up the zero insertion force clip with a plastic opening tool and pull out the ribbon cable.

Step 8

  • Remove the five 5.7mm PH00 screws with a screwdriver and pull out the motherboard.

Remove the five 5.7mm PH00 screws with a screwdriver and pull out the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Abdulateef Abola

Member since: 03/08/2017

401 Reputation

                                      4 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       IUPUI, Team 4-1, Baechle Spring 2017                        

                                                  Member of IUPUI, Team 4-1, Baechle Spring 2017 



                    IUPUI-BAECHLE-S17S4G1                     


                                            2 Members                     


                                            8 Guides authored