Difficulty
Moderate
Steps
4
Time Required
5 - 10 minutes
Sections
1
- Lamp
- 4 steps
Flags
Featured Student Guide
This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.
BackInFocus IN35W
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Lamp
- Flip the projector on its backside and lay it on a flat surface.
- Remove the lamp door gently with your hands or a plastic opening tool.
Flip the projector on its backside and lay it on a flat surface.
Remove the lamp door gently with your hands or a plastic opening tool.
1024
Step 2
- Loosen the slotted screw with a flathead screwdriver (3.0).
Loosen the slotted screw with a flathead screwdriver (3.0).
Step 3
- Disconnect the lamp connector wire from the projector body.
- This part takes some force, but try to pull as carefully as possible to avoid breakage.
Disconnect the lamp connector wire from the projector body.
This part takes some force, but try to pull as carefully as possible to avoid breakage.
Step 4
- Carefully remove the lamp from its socket.
Carefully remove the lamp from its socket.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 5 other contributors
Grace Hubert
Member since: 10/18/2021
608 Reputation
5 Guides authored
Badges:
7
+4 more badges
Team
UMass Dartmouth, Team 1-2, Simcock Fall 2021
Member of UMass Dartmouth, Team 1-2, Simcock Fall 2021
UMASSD-SIMCOCK-F21S1G2
4 Members
5 Guides authored
