Insignia Flex 11 6 Battery Replacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          10 - 15 minutes            

Sections

1

• Battery
• 5 steps

Flags

0

• BackInsignia Flex 11.6

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Before working on the device, make sure the device is off and not plugged into any power source for safety reasons. Failure to comply could result in injury.
• Detach the keyboard from the screen in 2 different places by putting one hand on the keyboard while gently pulling up on the screen with the other hand.

Before working on the device, make sure the device is off and not plugged into any power source for safety reasons. Failure to comply could result in injury.

Detach the keyboard from the screen in 2 different places by putting one hand on the keyboard while gently pulling up on the screen with the other hand.

1024

Step 2

• Remove the two 6.1 mm Phillips J000 screws from the bottom of the device. Use Phillips Screwdriver size J1.
• If any screws are stripped, refer to the iFixit guide for how to remove a stripped screw.

Remove the two 6.1 mm Phillips J000 screws from the bottom of the device. Use Phillips Screwdriver size J1.

If any screws are stripped, refer to the iFixit guide for how to remove a stripped screw.

Step 3

• Using a plastic opening tool, gently pry off the back cover.

Using a plastic opening tool, gently pry off the back cover.

Step 4

• Remove the electrical connector that connects to the battery to remove the power to the battery.

Remove the electrical connector that connects to the battery to remove the power to the battery.

Step 5

• Make sure not to bend the battery too excessively as if bent too much, it could rupture a cell within the battery and possibly cause a fire.
• The battery is glued onto the device. To remove it, use a nylon spudger or plastic card to slide underneath the battery and scrape back and forth to remove the glue until the battery is removed from the device.

Make sure not to bend the battery too excessively as if bent too much, it could rupture a cell within the battery and possibly cause a fire.

The battery is glued onto the device. To remove it, use a nylon spudger or plastic card to slide underneath the battery and scrape back and forth to remove the glue until the battery is removed from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Connor Sweeney                     

Member since: 09/28/2016

422 Reputation

                                      5 Guides authored                  



                       Badges:
                       16







                                                        +13 more badges                           

Team

                       Eastern Washington University, Team 2-4, Mathisen Fall 2016                        

                                                  Member of Eastern Washington University, Team 2-4, Mathisen Fall 2016 



                    EWU-MATHISEN-F16S2G4                     


                                            4 Members                     


                                            10 Guides authored                     

arag12 - Feb 19, 2019

Reply

Donde puedo adquirir la batería?

Robert Sandfort - Oct 8, 2019

Reply

There are no screws on the bottom edge of my invicta model P11A8100. Can I bypass removing screws and proceed to removing the back?

There are no screws on the bottom of my model P11A8100. Can I bypass removal is said screws and proceed to opening the back?

Hank Drabczak - Oct 22, 2019

Reply

Great instructions but I cant find a battery replacement. Battery number 3394122-2p

Great instructions but now I cant find the battery anywhere it is 3394122-2p