Difficulty

Moderate

Steps

8

Time Required

                          10 - 15 minutes

Sections

1

  • Fan
  • 8 steps

Flags

0

  • BackFan

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Step 4 requires taking off the cover plate that protects the power connections of all parts. Take caution around the cover plate’s sharp edges.

Before beginning, switch off the power and unplug the power cable from the power outlet.

What you need

Step 1

              Fan
  • Turn off the air humidifier using the 0/1 switch at the bottom edge of back side.
  • Hold the top-back of the air humidifier and remove the upper part from the lower part.
  • Remove water from the water chamber and wipe it.

Turn off the air humidifier using the 0/1 switch at the bottom edge of back side.

Hold the top-back of the air humidifier and remove the upper part from the lower part.

Remove water from the water chamber and wipe it.

1024

Step 2

  • Flip the humidifier so that the bottom is facing upwards.
  • Use a Phillips # 2 screwdriver to remove four 13 mm screws from the bottom cover hole.
  • Remove the bottom cover to access the fan and other parts of the humidifier.

Flip the humidifier so that the bottom is facing upwards.

Use a Phillips # 2 screwdriver to remove four 13 mm screws from the bottom cover hole.

Remove the bottom cover to access the fan and other parts of the humidifier.

Step 3

  • Use a Phillips #2 screwdriver to remove four 30 mm screws from the fan.
  • Remove the fan from its place and keep it close to its power connector.

Use a Phillips #2 screwdriver to remove four 30 mm screws from the fan.

Remove the fan from its place and keep it close to its power connector.

Step 4

  • Using a spudger, straighten all three metal latches.
  • Hold both edges of the metal cover with your finger and pull upward to take it out from its position.
  • Metal cover edges are very sharp. Watch your finger when holding the metal cover.

Using a spudger, straighten all three metal latches.

Hold both edges of the metal cover with your finger and pull upward to take it out from its position.

Metal cover edges are very sharp. Watch your finger when holding the metal cover.

Step 5

  • Pull out the power connector of the fan from its port.
  • Use a wire cutter to cut the tie rope around the wires.
  • When cutting the tie rope, take care to avoid cutting any cables.
  • Remove the fan from the humidifier.
  • Plug in the new fan’s power connector.
  • Tie all cables together using a twist tie.

Pull out the power connector of the fan from its port.

Use a wire cutter to cut the tie rope around the wires.

When cutting the tie rope, take care to avoid cutting any cables.

Remove the fan from the humidifier.

Plug in the new fan’s power connector.

Tie all cables together using a twist tie.

Step 6

  • Attach the metal cover where it was before.
  • Bend the latches halfway down using a spudger to secure the metal cover.

Attach the metal cover where it was before.

Bend the latches halfway down using a spudger to secure the metal cover.

Step 7

  • Secure the new fan with the four 30 mm screws using a Phillips #2 screwdriver.

Secure the new fan with the four 30 mm screws using a Phillips #2 screwdriver.

Step 8

  • Put the bottom cover back in place.
  • Secure the bottom cover with the four 13 mm screws using a Phillips #2 screwdriver.
  • Flip the humidifier right-side up, and attach the upper part

Put the bottom cover back in place.

Secure the bottom cover with the four 13 mm screws using a Phillips #2 screwdriver.

Flip the humidifier right-side up, and attach the upper part

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    [deleted]

Member since: 05/08/2020

184 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge