Difficulty
Easy
Steps
4
Time Required
5 minutes
Sections
1
- Rear Case
- 4 steps
Flags
0
BackiPod Shuffle 3rd Generation
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rear Case
- Widen the small gap between the front and rear case by inserting a metal spudger into the gap near the top of the iPod.
- Be careful when using a metal spudger, as you may scratch the outer case.
Widen the small gap between the front and rear case by inserting a metal spudger into the gap near the top of the iPod.
Be careful when using a metal spudger, as you may scratch the outer case.
1024
Step 2
- Insert an iPod opening tool into the newly widened gap, and pry the rear case up and away from the front case.
Insert an iPod opening tool into the newly widened gap, and pry the rear case up and away from the front case.
Step 3
- Insert the iPod Shuffle opening tool into the gap between the front and rear case on the same side, at the bottom corner of the iPod.
- Pry the rear case away from the front case.
Insert the iPod Shuffle opening tool into the gap between the front and rear case on the same side, at the bottom corner of the iPod.
Pry the rear case away from the front case.
Step 4
- Lift the bottom of the rear case and remove it from the rest of the iPod.
Lift the bottom of the rear case and remove it from the rest of the iPod.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Matthew Newsom
Member since: 01/05/2010
37,896 Reputation
67 Guides authored
Badges:
47
+44 more badges
