Difficulty

Moderate

Steps

8

Time Required

                          10 minutes

Sections

2

  • Battery
  • 3 steps
  • Brush Module
  • 5 steps

Flags

0

  • BackiRobot Roomba 980

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Flip over the device and remove the two 11.5 mm screws using the Phillips #1 screwdriver.

Flip over the device and remove the two 11.5 mm screws using the Phillips #1 screwdriver.

1024

Step 2

  • Unscrew the back plate using a Phillips #1 screwdriver.
  • Carefully lift the panel up once the screws are removed.

Unscrew the back plate using a Phillips #1 screwdriver.

Carefully lift the panel up once the screws are removed.

Step 3

  • With both hands, grab the two black tabs on each end of the battery.
  • Pull the tabs upwards to remove the battery.

With both hands, grab the two black tabs on each end of the battery.

Pull the tabs upwards to remove the battery.

Step 4

              Brush Module
  • Press down on the button on the rear of the device.
  • Pull bin towards you to remove it.

Press down on the button on the rear of the device.

Pull bin towards you to remove it.

Step 5

  • Loosen the screw holding the side brush in place.
  • The screw is attached to the side brush and does not come out completely.
  • Lift the side brush.

Loosen the screw holding the side brush in place.

The screw is attached to the side brush and does not come out completely.

Lift the side brush.

Step 6

  • Remove the (2) 11.5mm Phillips #1 screws holding down the bottom plate.
  • Carefully lift the bottom plate.

Remove the (2) 11.5mm Phillips #1 screws holding down the bottom plate.

Carefully lift the bottom plate.

Step 7

  • Remove the (4) 15.8mm Phillips #1 gold screws around the brush module.

Remove the (4) 15.8mm Phillips #1 gold screws around the brush module.

Step 8

  • Lift the brush module carefully using both hands.

Lift the brush module carefully using both hands.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors 


                    Ernesto Rodriguez Romero

Member since: 09/27/2017

929 Reputation

                                      4 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       USF Tampa, Team S14-G2, Boczar Fall 2017                        

                                                  Member of USF Tampa, Team S14-G2, Boczar Fall 2017 



                    USFT-BOCZAR-F17S14G2                     


                                            4 Members                     


                                            5 Guides authored