Difficulty

Moderate

Steps

6

Time Required

                          10 - 15 minutes            

Sections

2

  • Front Plate
  • 3 steps
  • Motherboard
  • 3 steps

Flags

0

  • BackJabra CRUISER2

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Front Plate               
  • Use the iOpener tool to unglue the adhesive of the device. The link to the iOpener instructions are listed below.
  • iOpener Instructions

Use the iOpener tool to unglue the adhesive of the device. The link to the iOpener instructions are listed below.

iOpener Instructions

1024

Step 2

  • Place the flat head of the bigger plastic opening tool in between the front plate and back plate.
  • Pull the tool toward the back of the device to pry it open.
  • Repeat this process over all edges of the device.

Place the flat head of the bigger plastic opening tool in between the front plate and back plate.

Pull the tool toward the back of the device to pry it open.

Repeat this process over all edges of the device.

Step 3

  • Open up the device by pulling the front plate straight up from the back plate.

Open up the device by pulling the front plate straight up from the back plate.

Step 4

              Motherboard               
  • Carefully detach the wire running from the speaker to the motherboard by unplugging it from the white socket.

Carefully detach the wire running from the speaker to the motherboard by unplugging it from the white socket.

Step 5

  • Using the PH000, unscrew the three 4.55 mm screws in the motherboard.
  • The names of the screwdriver heads are listed on the sides of each head.

Using the PH000, unscrew the three 4.55 mm screws in the motherboard.

The names of the screwdriver heads are listed on the sides of each head.

Step 6

  • Remove the motherboard from the device by lifting it up from the back plate.

Remove the motherboard from the device by lifting it up from the back plate.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Spartacus                     

Member since: 10/17/2014

636 Reputation

                                      5 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges                           

Team

                       Baylor, Team 8-13, Williams Fall 2014                        

                                                  Member of Baylor, Team 8-13, Williams Fall 2014 



                    BU-WILLIAMS-F14S8G13                     


                                            3 Members                     


                                            5 Guides authored