Difficulty
Moderate
Steps
10
Time Required
Suggest a time??
Sections
1
- Jura Capresso IMPRESSA J5 opening procedure
- 10 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackJura (Capresso) Impressa J
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Jura Capresso IMPRESSA J5 opening procedure
- Unplug the power cord!
- Remove the water tank and the drip tray. Remove all coffee beans from the storage container.
Unplug the power cord!
Remove the water tank and the drip tray. Remove all coffee beans from the storage container.
1024
Step 2
- Flip open the lid of the bean compartment.
- Unscrew the two slotted screws inside the bean compartment. The screws have a rubber washer and will not come out completely.
- Remove the bean compartment.
Flip open the lid of the bean compartment.
Unscrew the two slotted screws inside the bean compartment. The screws have a rubber washer and will not come out completely.
Remove the bean compartment.
Step 3
- The top cover is fastened with oval head screws. Unscrew them.
- These screws have an oval head that makes them look like rivets (picture 2). You need to use a special bit - also available at iFixit - for their removal. Here a DIY guide. If the right bit is not available, it could be done with a pair of needle nose pliers. Jura wants to keep us out of our own machines!!!
The top cover is fastened with oval head screws. Unscrew them.
These screws have an oval head that makes them look like rivets (picture 2). You need to use a special bit - also available at iFixit - for their removal. Here a DIY guide. If the right bit is not available, it could be done with a pair of needle nose pliers. Jura wants to keep us out of our own machines!!!
Step 4
- Also remove the two oval head screws underneath the ground coffee compartment lid.
Also remove the two oval head screws underneath the ground coffee compartment lid.
Step 5
- Now you can pry up the top cover all around.
- Remove the top cover. This often requires a little force.
- Use plastic tools to avoid scratching your device.
Now you can pry up the top cover all around.
Remove the top cover. This often requires a little force.
Use plastic tools to avoid scratching your device.
Step 6
- Turn the device with the back facing you.
- Turn the Jura label a few degrees counterclockwise. If it’s hard to do, use a small suction cup.
- Remove the Jura label.
Turn the device with the back facing you.
Turn the Jura label a few degrees counterclockwise. If it’s hard to do, use a small suction cup.
Remove the Jura label.
Step 7
- Underneath the label you will find two Torx T15 screws. Remove them.
- Carefully pull the top of the chrome cover slightly outwards, then push it down and put it aside.
Underneath the label you will find two Torx T15 screws. Remove them.
Carefully pull the top of the chrome cover slightly outwards, then push it down and put it aside.
Step 8
- Remove the Torx T15 screw on the side panel with the water tank.
Remove the Torx T15 screw on the side panel with the water tank.
Step 9
- Pull the right side panel slightly towards the back.
- Remove the side panel.
Pull the right side panel slightly towards the back.
Remove the side panel.
Step 10
- Pull the left side panel slightly towards the back and remove it.
Pull the left side panel slightly towards the back and remove it.
Follow the steps in reverse order to reassemble your device.
Cancel: I did not complete this guide.
2 other people completed this guide.
These translators are helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
jana°
Annika Faelker
VauWeh
Author
with 1 other contributor
VauWeh
Member since: 10/19/2015
160,518 Reputation
211 Guides authored
Badges:
41
+38 more badges
