Difficulty

Moderate

Steps

7

Time Required

Suggest a time??

Sections

3

  • Front Panel Assembly
  • 5 steps
  • Top Panel Removal
  • 1 step
  • Passenger Side Panel Removal and
  • 1 step

Flags

0

  • BackJVC KW-V820BT

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Front Panel Assembly
  • Remove the four 1/8-inch black machine screws using a Phillips #00 screwdriver.

Remove the four 1/8-inch black machine screws using a Phillips #00 screwdriver.

1024

Step 2

  • Remove three steel-finish, pan-head, 1/64 x 3/16" machine screws identified in the photograph, using the Phillips #0 screwdriver.

Remove three steel-finish, pan-head, 1/64 x 3/16" machine screws identified in the photograph, using the Phillips #0 screwdriver.

Step 3

  • Using your fingers and/or a metal spudger, gently release the plastic locking tabs of the front panel assembly from the steel enclosure while prying the front panel assembly away from the steel enclosure with your fingers.

Using your fingers and/or a metal spudger, gently release the plastic locking tabs of the front panel assembly from the steel enclosure while prying the front panel assembly away from the steel enclosure with your fingers.

Step 4

  • Gently remove the front panel from the steel enclosure.

Gently remove the front panel from the steel enclosure.

Step 5

  • Gently separate the ribbon cable from from ZIF connector on the circuit board using a metal smudger.
  • Be careful not to scratch or damage components or features of the circuit board with the metal spudger

Gently separate the ribbon cable from from ZIF connector on the circuit board using a metal smudger.

Be careful not to scratch or damage components or features of the circuit board with the metal spudger

Step 6

              Top Panel Removal
  • Remove seven 1/64 x 3/16" screws from the top panel using the Phillips #0 screwdriver.
  • Remove the top panel.

Remove seven 1/64 x 3/16" screws from the top panel using the Phillips #0 screwdriver.

Remove the top panel.

Step 7

              Passenger Side Panel Removal and
  • Remove the five pan-head, 1/64 x 3/16" machine screws using a Phillips #0 screwdriver.

Remove the five pan-head, 1/64 x 3/16" machine screws using a Phillips #0 screwdriver.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Marshall Andersen

Member since: 10/02/2018

665 Reputation

                                      6 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Linn Benton Community College, Team S1-G6, Johnson Fall 2018                        

                                                  Member of Linn Benton Community College, Team S1-G6, Johnson Fall 2018 



                    LBCC-JOHNSON-F18S1G6                     


                                            3 Members                     


                                            8 Guides authored