Klipper Power On Button Repair Guide

Difficulty

Moderate

Steps

1

Time Required

Suggest a time??

Sections

• Klipper Power On Button
• 1 step

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackBLV MGN Cube

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Step 1

              Wiring               

• You will be removing the yellow and green wires from terminal 1 and 2 from step 2
• Re-crimp the wires and using a 3 pin connector. Connect it to E1_STOP on the Duet
• Polarity of the green and yellow wire doesn’t matter.
• Add the commands for “output_pin psupower” “gcode_macro M80” “gcode_macro M81” and “gcode_button power_on” to your printer.cfg
• I’ve uploaded my config to my github

You will be removing the yellow and green wires from terminal 1 and 2 from step 2

Re-crimp the wires and using a 3 pin connector. Connect it to E1_STOP on the Duet

Polarity of the green and yellow wire doesn’t matter.

Add the commands for “output_pin psupower” “gcode_macro M80” “gcode_macro M81” and “gcode_button power_on” to your printer.cfg

I’ve uploaded my config to my github

1024

Cancel: I did not complete this guide.

Author

                    David Husolo                     

Member since: 06/16/2021

7,245 Reputation

                                      28 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges