Difficulty

Moderate

Steps

6

Time Required

                          1 hour

Sections

1

  • LCD Screen
  • 6 steps

Flags

4

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackKodak EasyShare CD82

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              LCD Screen
  • Remove the batteries and the memory card from the device.
  • Remove the 2 screws located at the bottom of the device.

Remove the batteries and the memory card from the device.

Remove the 2 screws located at the bottom of the device.

1024

Step 2

  • Remove the 2 screws on the side, to the left of the camera lens.
  • Remove the 2 screws on the side, to the right of the camera lens.
  • Pry the casing from the device starting at the battery compartment and following the seem around the camera.

Remove the 2 screws on the side, to the left of the camera lens.

Remove the 2 screws on the side, to the right of the camera lens.

Pry the casing from the device starting at the battery compartment and following the seem around the camera.

Step 3

  • Remove the front panel from the device first, then remove the back panel.
  • Do not remove the LCD screen from the device once it becomes visible.

Remove the front panel from the device first, then remove the back panel.

Do not remove the LCD screen from the device once it becomes visible.

Step 4

  • Flip the LCD screen away from the top of the device to reveal the ribbon cable.
  • This is water damage the has afflicted the camera.
  • Remove the 3 screws from the LCD screen holder.
  • Pry the screen holder from the circuit board connector.

Flip the LCD screen away from the top of the device to reveal the ribbon cable.

This is water damage the has afflicted the camera.

Remove the 3 screws from the LCD screen holder.

Pry the screen holder from the circuit board connector.

Step 5

  • Disconnect the logic board from the right side of the frame.
  • Remove the small ribbon cable that is connecting the button panel to the logic board, using a small pair of tweezers or hemostat.
  • Remove the screw on the top right side of the device.

Disconnect the logic board from the right side of the frame.

Remove the small ribbon cable that is connecting the button panel to the logic board, using a small pair of tweezers or hemostat.

Remove the screw on the top right side of the device.

Step 6

  • Open the connector and move the black clip into the upward position, freeing the cable. Remove the LCD screen and the holder.
  • While the camera is disassembled, use isopropyl alcohol to remove rust and clean the device.
  • Follow these steps in reverse order to reassemble. The device should be fully functional upon completion.

Open the connector and move the black clip into the upward position, freeing the cable. Remove the LCD screen and the holder.

While the camera is disassembled, use isopropyl alcohol to remove rust and clean the device.

Follow these steps in reverse order to reassemble. The device should be fully functional upon completion.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 5 other contributors 


                    oldturkey03

Member since: 09/29/2010

722,317 Reputation

                                      109 Guides authored                  



                       Badges:
                       53







                                                        +50 more badges

Team

                       Global Fixers                        

                                                  Member of Global Fixers 



                    Community                     


                                            22 Members                     


                                            240 Guides authored

Januchowdary - Oct 27, 2018

Reply

Is there any repair for Kodak CD80 easy share camera…..as my camera is not working