Difficulty

Moderate

Steps

8

Time Required

                          30 - 45 minutes

Sections

1

  • Landis Universal Cylindrical Grinder (3U4D5D-17 ) Grindstone
  • 8 steps

Flags

0

  • BackTool

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Landis Universal Cylindrical Grinder (3U4D5D-17 ) Grindstone
  • Switch off the grinder’s breaker box before performing any maintenance on the machine.

Switch off the grinder’s breaker box before performing any maintenance on the machine.

1024

Step 2

  • Lift the yellow guard up to unlock the grindstone access panel.

Lift the yellow guard up to unlock the grindstone access panel.

Step 3

  • Pull the access panel outward to expose the grindstone.

Pull the access panel outward to expose the grindstone.

Step 4

  • Remove the twelve bolts securing the grindstone using a ratchet with a 5/16 Hex bit.

Remove the twelve bolts securing the grindstone using a ratchet with a 5/16 Hex bit.

Step 5

  • Gently remove the steel hub from the grindstone spindle.

Gently remove the steel hub from the grindstone spindle.

Step 6

  • Carefully remove the grindstone itself from the spindle, making sure to support it from the top and inner ring.
  • Mind your fingers! The grindstone is quite heavy and can cause injury if it is mishandled or dropped.

Carefully remove the grindstone itself from the spindle, making sure to support it from the top and inner ring.

Mind your fingers! The grindstone is quite heavy and can cause injury if it is mishandled or dropped.

Step 7

  • Softly sand the hub with 600-grit sandpaper or a wire brush to remove any surface rust.

Softly sand the hub with 600-grit sandpaper or a wire brush to remove any surface rust.

Step 8

  • Although not mandatory, now would be a good time to scrape out any debris that has built up on the inside of the guard.

Although not mandatory, now would be a good time to scrape out any debris that has built up on the inside of the guard.

To reassemble your device, follow these instructions in reverse order starting from step 6.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 3 other contributors 


                    Andrew Shotwell

Member since: 02/23/2016

136 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Texas Tech, Team 22-3, Rauch Spring 2016                        

                                                  Member of Texas Tech, Team 22-3, Rauch Spring 2016 



                    TTU-RAUCH-S16S22G3                     


                                            3 Members                     


                                            1 Guide authored