Difficulty

Moderate

Steps

14

Time Required

                          10 minutes

Sections

2

  • Back Panel
  • 3 steps
  • Motherboard
  • 11 steps

Flags

3

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackLenovo Ideapad 310-15IKB

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel
  • Flip the laptop over so the back panel is facing up.

Flip the laptop over so the back panel is facing up.

1024

Step 2

  • Remove thirteen screws from the back panel using a Phillips #0 screwdriver.

Remove thirteen screws from the back panel using a Phillips #0 screwdriver.

Step 3

  • Remove the two small back panels from the device.

Remove the two small back panels from the device.

Step 4

              Motherboard
  • Take the hard drive out by pulling out and upward

Take the hard drive out by pulling out and upward

Step 5

  • Remove three screws from the right panel using a Phillips #0 screwdriver.

Remove three screws from the right panel using a Phillips #0 screwdriver.

Step 6

  • Use your hands to pull both sides of the RAM and release the black restrictors that hold the RAM into place.

Use your hands to pull both sides of the RAM and release the black restrictors that hold the RAM into place.

Step 7

  • Take out the RAM by pulling it out and up.

Take out the RAM by pulling it out and up.

Step 8

  • Lift the retaining flap securing the keyboard cable to the motherboard.
  • Slide the ribbon cable out of the connector.

Lift the retaining flap securing the keyboard cable to the motherboard.

Slide the ribbon cable out of the connector.

Step 9

  • Use an iFixit opening tool to pry the keyboard up from the body of the laptop.

Use an iFixit opening tool to pry the keyboard up from the body of the laptop.

Step 10

  • Remove eight screws from the motherboard using a Phillips #0 screwdriver.

Remove eight screws from the motherboard using a Phillips #0 screwdriver.

Step 11

  • Detach all the wires that are connected to the motherboard.

Detach all the wires that are connected to the motherboard.

Step 12

  • Remove the top screws from the motherboard.

Remove the top screws from the motherboard.

Step 13

  • Remove the bottom screws from the motherboard.

Remove the bottom screws from the motherboard.

Step 14

  • Use your hands to lift the motherboard out of the laptop.

Use your hands to lift the motherboard out of the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Christian Sundberg

Member since: 02/08/2022

277 Reputation

                                      2 Guides authored                  



                       Badges:
                       3

Team

                       University of Kentucky, Team 1-1, Kaufmann Spring 2022                        

                                                  Member of University of Kentucky, Team 1-1, Kaufmann Spring 2022 



                    UKY-KAUFMANN-S22S1G1                     


                                            4 Members                     


                                            5 Guides authored