Difficulty

Moderate

Steps

13

Time Required

                          15 minutes

Sections

3

  • Battery
  • 4 steps
  • Disc Drive
  • 4 steps
  • Keyboard
  • 5 steps

Flags

0

  • BackLenovo IdeaPad Z570

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Place the laptop face down with the battery facing away from you

Place the laptop face down with the battery facing away from you

1024

Step 2

  • Flip the right switch right-bound

Flip the right switch right-bound

Step 3

  • Hold the left switch.

Hold the left switch.

Step 4

  • Push the battery forward lightly to remove it while holding the left switch.

Push the battery forward lightly to remove it while holding the left switch.

Step 5

              Disc Drive
  • Place the laptop face down with the battery slot facing away from you.

Place the laptop face down with the battery slot facing away from you.

Step 6

  • Loosen all seven 3mm screws from the back panel using a Phillips #0 screwdriver.
  • These screws cannot be removed from the device.
  • Remove the back panel from the device.

Loosen all seven 3mm screws from the back panel using a Phillips #0 screwdriver.

These screws cannot be removed from the device.

Remove the back panel from the device.

Step 7

  • Remove the 3 mm Phillips #0 screw located on the left hand side that holds the disc drive in place.

Remove the 3 mm Phillips #0 screw located on the left hand side that holds the disc drive in place.

Step 8

  • Gently remove the disc drive from the left hand side of the laptop.

Gently remove the disc drive from the left hand side of the laptop.

Step 9

              Keyboard
  • Remove the three 12mm screws found near these symbols with a Phillips #0 screwdriver.

Remove the three 12mm screws found near these symbols with a Phillips #0 screwdriver.

Step 10

  • Orient the laptop at a 90 degree angle with the keyboard being vertical and the screen horizontal to the surface you are working on.

Orient the laptop at a 90 degree angle with the keyboard being vertical and the screen horizontal to the surface you are working on.

Step 11

  • Pry the keyboard off staring from the corner where the “esc”” key is located using an opening tool.
  • Now orient the laptop in the standard position and take off the keyboard.

Pry the keyboard off staring from the corner where the “esc”” key is located using an opening tool.

Now orient the laptop in the standard position and take off the keyboard.

Step 12

  • At the terminal block, flip the black switch on the terminal up.

At the terminal block, flip the black switch on the terminal up.

Step 13

  • Pull the keyboard out from the terminal block.

Pull the keyboard out from the terminal block.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 3 other contributors 


                    Mya DeSantos

Member since: 03/18/2019

315 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       UMass Dartmouth, Team S1-G6, Botvin Spring 2019                        

                                                  Member of UMass Dartmouth, Team S1-G6, Botvin Spring 2019 



                    UMASSD-BOTVIN-S19S1G6                     


                                            4 Members                     


                                            5 Guides authored