Lenovo Thinkpad T410I Lcd Screen Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          15 - 20 minutes            

Sections

2

• Screen Bezel
• 4 steps
• LCD screen
• 3 steps

Flags

0

• BackLenovo Thinkpad T410i

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

Guide notes

• This guide is hardware only, and it would not help resolve issues such as screen staying black or screen not responding to input. Unplug the system from the power source (if it is plugged in), and remove the battery before you perform any of the steps. Once you install the new LCD screen, safely dispose the old one.

What you need

Step 1

              Screen Bezel               

• Use a spudger to remove the plastic covers from the LCD screen.

Use a spudger to remove the plastic covers from the LCD screen.

1024

Step 2

• Remove the two 6.0mm screws on each side using Philips #0 head screwdriver as shown in the picture.

Remove the two 6.0mm screws on each side using Philips #0 head screwdriver as shown in the picture.

Step 3

• Use a spudger to separate the bezel of the LCD screen.

Use a spudger to separate the bezel of the LCD screen.

Step 4

• Continue along the edges lifting up and prying off the plastic LCD bezel.

Continue along the edges lifting up and prying off the plastic LCD bezel.

Step 5

              LCD screen               

• Use a Philips #0 head screwdriver to remove the two 6.0mm screws from the top corners of the LCD screen.

Use a Philips #0 head screwdriver to remove the two 6.0mm screws from the top corners of the LCD screen.

Step 6

• Place the LCD screen safely down on its front.
• Pulling the screen too far away from the screen may damage delicate ribbon cable.
• Peel the tape off the ribbon cable’s contacts.
• Carefully detach the ribbon cable from the LCD screen.
• Poking the golden contacts may easily damage them.

Place the LCD screen safely down on its front.

Pulling the screen too far away from the screen may damage delicate ribbon cable.

Peel the tape off the ribbon cable’s contacts.

Carefully detach the ribbon cable from the LCD screen.

Poking the golden contacts may easily damage them.

Step 7

• Remove the screen from your device.

Remove the screen from your device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Harsh Patel                     

Member since: 10/02/2017

287 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       USF Tampa, Team S1-G2, Thompson Fall 2017                        

                                                  Member of USF Tampa, Team S1-G2, Thompson Fall 2017 



                    USFT-THOMPSON-F17S1G2                     


                                            4 Members                     


                                            6 Guides authored