Difficulty

Easy

Steps

10

Time Required

                          2 minutes

Sections

4

  • Battery
  • 1 step
  • RAM
  • 2 steps
  • Hard Drive
  • 3 steps
  • Keyboard
  • 4 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackLenovo ThinkPad T410

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Flip the laptop over.
  • Push and hold the locking switch to the left.
  • Pull the battery out with your other hand.

Flip the laptop over.

Push and hold the locking switch to the left.

Pull the battery out with your other hand.

1024

Step 2

              RAM
  • Remove the single Phillips #0 screw grin the back panel.
  • Pull the back panel off.

Remove the single Phillips #0 screw grin the back panel.

Pull the back panel off.

Step 3

  • Pull the metal prongs at the side of the RAM away from each other.
  • The RAM will pop out of its socket when done correctly.
  • Pull the RAM out.

Pull the metal prongs at the side of the RAM away from each other.

The RAM will pop out of its socket when done correctly.

Pull the RAM out.

Step 4

              Hard Drive
  • Remove the single Phillips #0 screw that secures the hard drive cover.

Remove the single Phillips #0 screw that secures the hard drive cover.

Step 5

  • Flip the black plastic tab out.

Flip the black plastic tab out.

Step 6

  • Pull the hard drive out.

Pull the hard drive out.

Step 7

              Keyboard
  • Remove the Flathead 2.5mm screw.
  • Flip the laptop over.

Remove the Flathead 2.5mm screw.

Step 8

  • Wedge the flat end of a spudger, or plastic opening tool, under the end of the keyboard and pry up.

Wedge the flat end of a spudger, or plastic opening tool, under the end of the keyboard and pry up.

Step 9

  • Slide the keyboard out of the way until you can see what’s underneath it.
  • The keyboard is still attached with a ribbon cable so don’t try to fully remove it.

Slide the keyboard out of the way until you can see what’s underneath it.

The keyboard is still attached with a ribbon cable so don’t try to fully remove it.

Step 10

  • Use the flat end of a spudger to unplug the keyboard connector from the laptop.
  • Pull the keyboard out.

Use the flat end of a spudger to unplug the keyboard connector from the laptop.

Pull the keyboard out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Blake Wilson

Member since: 02/21/2018

117 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       University of North Texas, Team S4-G2, Thompson Spring 2018                        

                                                  Member of University of North Texas, Team S4-G2, Thompson Spring 2018 



                    UNT-THOMPSON-S18S4G2                     


                                            4 Members                     


                                            6 Guides authored