Difficulty
Moderate
Steps
3
Time Required
10 minutes
Sections
1
- Fan
- 3 steps
Flags
0
BackLenovo ThinkPad T431S
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Fan
- Remember before starting any disassembly, to prevent electric shock or harm, disconnect from any external power source and make sure device is powered off.
- Use a Phillips #1 screwdriver bit to remove eight 5.0 mm screws from the back panel.
- Carefully pry off the back panel using the opening tool.
Remember before starting any disassembly, to prevent electric shock or harm, disconnect from any external power source and make sure device is powered off.
Use a Phillips #1 screwdriver bit to remove eight 5.0 mm screws from the back panel.
Carefully pry off the back panel using the opening tool.
1024
Step 2
- Use a Phillips #1 screwdriver bit and remove the four 3.0 mm screws from the heatsink.
Use a Phillips #1 screwdriver bit and remove the four 3.0 mm screws from the heatsink.
Step 3
- Disconnect the cable attached to the fan, pulling the connector straight down.
- Lift and remove the fan.
Disconnect the cable attached to the fan, pulling the connector straight down.
Lift and remove the fan.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 4 other contributors
Joe Minnich
Member since: 01/30/2020
178 Reputation
1 Guide authored
Badges:
7
+4 more badges
Team
Embry-Riddle Aeronautical University, Team S14-G2, Lamothe Spring 2020
Member of Embry-Riddle Aeronautical University, Team S14-G2, Lamothe Spring 2020
ERAU-LAMOTHE-S20S14G2
4 Members
5 Guides authored
Jocko - Mar 28, 2021
Reply
Well done. I will have a go at fixing the fan on my T430s now that I’ve seen how easy it is to do.