Difficulty

Moderate

Steps

8

Time Required

                          10 - 20 minutes

Sections

3

  • External Battery
  • 3 steps
  • Bottom Case
  • 3 steps
  • Hard Drive
  • 2 steps

Flags

0

  • BackLenovo ThinkPad T580

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

This guide will detail the steps necessary to replace the hard drive.

The most common reasons why this component would need to be replaced is because:

  • Your hard drive is fullYour BIOS indicates your hard drive is damaged

If you are not experiencing these problems with this component consider examining the troubleshooting page for this device.

There are no specialized skills required for replacing the hard drive.

What you need

Step 1

              External Battery
  • Slide the switch on the left side of the battery to the left.

Slide the switch on the left side of the battery to the left.

1024

Step 2

  • Slide the switch on the right side of the battery to the right while applying upward pressure on the battery.

Slide the switch on the right side of the battery to the right while applying upward pressure on the battery.

Step 3

  • Pull the battery directly out of the socket

Pull the battery directly out of the socket

Step 4

              Bottom Case
  • Using a Phillips #00 screwdriver, unscrew the eight 3.3 mm captive screws on the bottom of the laptop.
  • The “captive” screws will not come out of the case.

Using a Phillips #00 screwdriver, unscrew the eight 3.3 mm captive screws on the bottom of the laptop.

The “captive” screws will not come out of the case.

Step 5

  • Run a Jimmy along the crease of the computer all the way around, twisting it periodically to disengage the clips.

Run a Jimmy along the crease of the computer all the way around, twisting it periodically to disengage the clips.

Step 6

  • Once all the clips are released, remove the bottom cover.
  • You may need to jiggle the case slightly to release the clips around the external battery bay.

Once all the clips are released, remove the bottom cover.

You may need to jiggle the case slightly to release the clips around the external battery bay.

Step 7

              Hard Drive
  • Using a spudger, flip up the locking black tab of the hard drive ZIF connector.
  • Pull the hard drive cable out from the connector on the motherboard.

Using a spudger, flip up the locking black tab of the hard drive ZIF connector.

Pull the hard drive cable out from the connector on the motherboard.

Step 8

  • Pull the hard drive case out of the slot using the tab.

Pull the hard drive case out of the slot using the tab.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 5 other contributors 


                    Ben Elkayam

Member since: 01/23/2020

912 Reputation

                                      8 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Cal Poly, Team S18-G6, White Winter 2020                        

                                                  Member of Cal Poly, Team S18-G6, White Winter 2020 



                    CPSU-WHITE-W20S18G6                     


                                            4 Members                     


                                            18 Guides authored

Roger Elder - Jan 27, 2022

Reply

Before any of this go into the bios setup and disable the internal battery.