Difficulty
Moderate
Steps
5
Time Required
25 - 45 minutes
Sections
2
- Back Cover
- 3 steps
- Fan and Heat Sink
- 2 steps
Flags
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Needs More Images
A few more images would make this guide’s procedures crystal clear.
BackLenovo ThinkPad X1 Carbon 5th Gen
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Turn the laptop on to its back.
Turn the laptop on to its back.
1024
Step 2
- Use the Phillips #1 screwdriver to remove five 1.2 mm screws from the back cover of the laptop.
Use the Phillips #1 screwdriver to remove five 1.2 mm screws from the back cover of the laptop.
Step 3
- Remove the back cover using the opening tool, leaving the laptop back exposed.
- Use the opening tool to pry the edge and work your way around the perimeter.
- Careful to undo the clips before removing the back cover.
Remove the back cover using the opening tool, leaving the laptop back exposed.
Use the opening tool to pry the edge and work your way around the perimeter.
Careful to undo the clips before removing the back cover.
Step 4
Fan and Heat Sink
- Use the Phillips #1 screwdriver to remove all five 1 mm screws holding the fan and heat sink down.
Use the Phillips #1 screwdriver to remove all five 1 mm screws holding the fan and heat sink down.
Step 5
- Pick up the fan and heat sink and carefully and remove it.
Pick up the fan and heat sink and carefully and remove it.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Diego Garcia reyes
Member since: 09/01/2021
472 Reputation
5 Guides authored
Badges:
7
+4 more badges
Team
Gateway, Team 1-3, Saknee Fall 2021
Member of Gateway, Team 1-3, Saknee Fall 2021
GCC-SAKNEE-F21S1G3
4 Members
6 Guides authored