Difficulty

Easy

Steps

4

Time Required

                          10 - 30 minutes            

Sections

1

  • Back Cover
  • 4 steps

Flags

0

  • BackLenovo ThinkPad X1 Carbon 9th Gen

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Unfasten the back cover               
  • For your safety, discharge the battery below 25% and power down your device before disassembly.
  • Use a Phillips #1 screwdriver to loosen the five captive screws holding the back cover.

For your safety, discharge the battery below 25% and power down your device before disassembly.

Use a Phillips #1 screwdriver to loosen the five captive screws holding the back cover.

1024

Step 2

              Release the corner clips               
  • Insert an opening pick between a corner of the back cover and the chassis, near a hinge.
  • Pry upward to release the retaining clips.
  • Listen for a click sound when clips release.
  • Repeat this process for the opposite corner.

Insert an opening pick between a corner of the back cover and the chassis, near a hinge.

Pry upward to release the retaining clips.

Listen for a click sound when clips release.

Repeat this process for the opposite corner.

Step 3

              Release the edge clips               
  • Insert the opening pick between the cover and the body.
  • Pry upward and release all of the retaining clips.

Insert the opening pick between the cover and the body.

Pry upward and release all of the retaining clips.

Step 4

              Remove the back cover               
  • Lift the back cover off the chassis and remove it.
  • If the cover feels stuck to the chassis, use an opening pick to release any remaining clips around the perimeter of the back cover.

Lift the back cover off the chassis and remove it.

If the cover feels stuck to the chassis, use an opening pick to release any remaining clips around the perimeter of the back cover.

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Lenovo ThinkPad X1 Carbon community for help.

Cancel: I did not complete this guide.

Author

                    Clay Eickemeyer                     

Member since: 09/19/2022

14,946 Reputation

                                      125 Guides authored                  



                       Badges:
                       27







                                                        +24 more badges                           

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,772 Guides authored